Vacuuming your pool is an important part of keeping it clean and free of debris. It is a job that can be done manually, or with the help of a vacuum cleaner.

In this article, we will discuss the steps involved in vacuuming your pool by hand. We will also provide tips for making the process easier and more efficient. Let’s get started.

Why Do You Need to Vacuum Your Pool?

One of the most important reasons to vacuum your pool is to remove debris that has accumulated on the bottom. This debris can include leaves, twigs, insects, and even small stones.

If left unchecked, this debris can lead to problems with your pool’s filtration system and pump. Additionally, vacuuming your pool will help to keep the water clean and clear.

How Often Should You Vacuum Your Pool?

The frequency with which you vacuum your pool will depend on a number of factors, including the size of the pool, the amount of use it gets, and the type of filter you have. Generally speaking, however, most pools should be vacuumed at least once a week.

If your pool is used frequently, or if you have a lot of trees or other plants nearby, you may need to vacuum more often.

Benefits of Manual Pool Vacuuming

There are several benefits to vacuuming your pool by hand. First, it is a great way to get rid of small debris that has accumulated on the bottom of the pool. This includes leaves, twigs, and insects.

Another benefit of manual vacuuming is that it can be done more frequently than with a vacuum cleaner. This is especially important if you have a lot of debris in your pool. Finally, manual vacuuming is a good way to spot any problems with your pool’s filtration system.

What Materials Will You Need?

Before you begin vacuuming your pool, you will need to gather a few supplies. These include:

• A garden hose
• A brush
• A bucket
• Pool vacuum cleaner

Once you have gathered all of the necessary materials, you are ready to begin vacuuming your pool.

Manual Pool Vacuuming Instructions

The first step is to attach the garden hose to the vacuum cleaner. If you do not have a vacuum cleaner, you can skip this step. Next, place the end of the hose into the water and turn on the vacuum cleaner.

If you are using a manual vacuum cleaner, insert the brush into the water and start scrubbing the bottom of the pool. As you scrub, debris will be sucked up into the vacuum cleaner.

Once you have finished vacuuming, turn off the vacuum cleaner and detach the hose. Pour the debris into a bucket and dispose of it properly. That’s all there is to it! Vacuuming your pool is a quick and easy way to keep it clean and free of debris.

By following these simple instructions, you can ensure that your pool is always ready for a swim.

Things to Remember When Vacuuming Your Pool

There are a few things to keep in mind when vacuuming your pool. First, be sure to vacuum the entire pool, including the corners and steps. Second, be sure to empty the vacuum cleaner frequently so that it doesn’t become overloaded.

Finally, remember to turn off the vacuum cleaner when you are finished using it. This will prevent any damage to the motor.

How Long Does it Take to Vacuum a Pool?

The amount of time it takes to vacuum a pool will vary depending on the size of the pool and the amount of debris. However, most pools can be vacuumed in 30 minutes or less.

Is Automatic Pool Vacuuming a Better Option?

While automatic pool vacuuming is a convenient option, it is not always the best choice. Automatic vacuums can be expensive, and they may not remove all of the debris from your pool.

Additionally, automatic vacuums can damage your pool’s liner if they aren’t used properly. This is why it’s important to do the job correctly or hire a pool expert that can help.

Make Sure to Hire a Professional if You Need Help

If you are having difficulty vacuuming your pool, or if you don’t have the time to do it yourself, consider hiring a professional. Pool experts can vacuum your pool quickly and efficiently.

They will also be able to spot any problems with your pool’s filtration system or pump. Hiring a professional is the best way to ensure that your pool is properly cleaned and maintained.

Learn More About Our Pool Cleaning Services

If you are interested in learning more about our pool cleaning services, please contact us. We would be happy to answer any questions you have or provide you with a free quote.

If you’re like most people, you probably don’t know much about pool pumps. And if your pool pump goes out, it can be difficult to determine what’s wrong with it and whether or not you can fix it yourself.

In this blog post, we will discuss some common signs that your pool pump is bad and needs to be replaced. We will also provide tips on how to find a qualified technician to help you with the replacement process.

What is a Pool Pump?

A pool pump is a mechanical device that circulates water through your pool’s filtration system. The pump is responsible for circulating the water in the pool and keeping it clean. The most common type of pool pump is a centrifugal pump, which uses a rotating impeller to draw water into the pump and then push it out through the discharge port.

Why are Pool Pumps Important?

Pool pumps are important because they keep the water in your pool clean and circulating. Without a pool pump, your pool would quickly become stagnant and dirty.

How to Tell if Your Pool Pump is Bad

There are several signs that your pool pump is failing or has failed. If you notice any of the following, it’s time to call a qualified technician to replace your pool pump:

Your Pool Pump is Over 10 Years Old

If your pool pump is over ten years old, it is probably time for a replacement. Pool pumps typically last about ten to fifteen years, so if yours is approaching or surpassing that age, it is likely that it will need to be replaced soon.

Your Pool Pump is Noisy

If your pool pump is making strange noises, it could be a sign that something is wrong. Common signs of a failing pool pump include grinding, squealing, or humming noises. If you notice any of these, it’s time to call a technician.

Your Pool Pump Won’t Turn On

If your pool pump won’t turn on, it is likely that the motor has failed. This is a common problem with older pool pumps, and unfortunately, it usually means that the pump needs to be replaced.

Your Pool Pump isn’t Circulating Water

If your pool pump isn’t circulating water, there could be several issues at play. First, check to make sure that there is no debris blocking the impeller. If the impeller is clear and the pump still isn’t working, it’s time to call a technician.

It’s Tripping Your Home’s Circuit Breaker

If your pool pump is tripping your home’s circuit breaker, it is probably overloaded. This can be caused by a number of factors, including a dirty filter or a faulty motor. If you notice this happening, it’s important to call a technician right away.

Your Pool Pump Leaks Water

If your pool pump is leaking water, it could be due to a cracked housing or loose fittings. These problems can usually be fixed without replacing the entire pump, but if the leak is severe, you may need to replace the pump.

The Motor Keeps Turning Off

If the motor on your pool pump keeps turning off, it could be a sign of a problem with the electrical wiring. This is a serious issue that should be addressed by a qualified technician.

The Pump is Losing Suction

If your pool pump is losing suction, it could be due to a problem with the impeller or the filter. These problems can usually be fixed without replacing the entire pump, but if the problem persists, you may need to replace the pump.

How to Find a Qualified Technician

When you’re ready to replace your pool pump, it’s important to find a qualified technician to help you with the process. The best way to find a qualified technician is to ask for recommendations from friends or family who have had similar work done.

You can also search online for qualified technicians in your area. Once you’ve found a few candidates, be sure to check their reviews and credentials before making your final decision.

Replacing your pool pump can be a daunting task, but with the help of a qualified technician, it doesn’t have to be.

Need Help Replacing Your Pool Pump?

If you need help replacing your pool pump, the qualified technicians at OMNI Pools are here to help. We’ve been in business for over 25 years, and our team is dedicated to providing the best possible service. Contact us today to schedule a consultation. We’ll be happy to answer any questions you have and provide you with a free estimate.

Which is better for you: a saltwater or chlorine pool? This is a question that many people ask when they are deciding whether to install a pool in their backyard.

Both saltwater and chlorine pools have their pros and cons, but which one is the best choice for you? In this article, we will compare saltwater and chlorine pools and help you decide which one is the right choice for you.

What is a Saltwater Pool?

A saltwater pool is a pool that uses salt to generate chlorine. The salt is added to the water and then circulated through a generator. The generator uses an electrolytic process to convert the salt into chlorine.

The chlorine is then added to the pool water to kill bacteria and other contaminants. Saltwater pools are becoming increasingly popular because they are perceived as being more gentle on the skin and eyes than traditional chlorine pools.

What is a Chlorine Pool?

A chlorine pool is a pool that uses chemicals, usually in the form of tablets, to generate chlorine. The tablets are added to the water and then circulated through a filter. The filter removes impurities from the water and also helps to distribute the chlorine evenly throughout the pool.

Chlorine pools are the most common type of pool and have been around for many years. They are effective at killing bacteria and other contaminants, but can sometimes be harsh on the skin and eyes.

What are the Benefits of Saltwater Pools?

Saltwater pools are becoming increasingly popular because they are perceived as being more gentle on the skin and eyes than traditional chlorine pools. In addition, saltwater pools require less maintenance than chlorine pools.

You also don’t have to worry about storing or handling chemicals with a saltwater pool.

What are the Drawbacks of Saltwater Pools?

One of the biggest drawbacks of saltwater pools is the initial cost. Saltwater pools typically cost more to install than chlorine pools. In addition, saltwater pools require special generators that can be expensive to maintain.

What are the Benefits of Chlorine Pools?

Chlorine pools are the most common type of pool and have been around for many years. They are effective at killing bacteria and other contaminants.

Chlorine pools are also usually less expensive to install than saltwater pools. In addition, chlorine tablets are readily available and easy to store.

What Are the Drawbacks of Chlorine Pools?

The biggest drawback of chlorine pools is that they can sometimes be harsh on the skin and eyes. In addition, chlorine pools require more maintenance than saltwater pools. You also have to be careful when handling and storing chlorine tablets.

What is the Average Cost for Both Pools?

Both costs can vary depending on the company you hire to install the pool and a myriad of other factors. With that said, the average cost for a saltwater pool is $15,000. On the other hand, the average cost for a chlorine pool is $12,500.

How is a Saltwater Pool Installed?

A saltwater pool is installed by adding salt to the water and then circulating it through a generator. The generator uses an electrolytic process to convert the salt into chlorine. The chlorine is then added to the pool water to kill bacteria and other contaminants.

How is a Chlorine Pool Installed?

A chlorine pool is installed by adding chemicals, usually in the form of tablets, to the water and then circulating it through a filter. The filter removes impurities from the water and also helps to distribute the chlorine evenly throughout the pool.

Which Type of Pool Should You Choose?

The type of pool you choose should be based on your budget, maintenance preferences, and how often you plan on using the pool. If you are looking for a low-maintenance pool that is gentle on the skin and eyes, then a saltwater pool might be the right choice for you.

On the other hand, if you are looking for a pool that is less expensive to install and maintain, then a chlorine pool might be the better option. No matter which type of pool you choose, be sure to do your research and hire a reputable company to install it. This will help ensure that your pool lasts for many years to come.

Ready to Make a Decision?

If you’re still undecided, why not schedule a consultation with one of our pool experts? We would be more than happy to answer any questions you have and help you choose the right type of pool for your home. Give us a call today to learn more about how we can help you.

Remodeling your pool can be a fun and exciting project, but it’s important to make sure you are following all the rules and regulations. In Miami Dade county, you will need a permit to remodel your pool.

In this article, we will discuss the process of getting a permit and what you can expect. We will also provide some tips on how to make the process as smooth as possible.

What Entails a Pool Remodeling Project?

The first thing you need to do is determine what type of remodeling project you will be undertaking. Are you planning on making major changes to the structure of the pool? Or are you simply looking to update the decking or tilework?

Once you have a clear idea of the scope of work, you will need to submit a permit application to Miami Dade County. The application must include:

• A detailed description of the work that will be done
• The estimated value of the project
• Your contact information

After your application has been submitted, a member of the county staff will review it and contact you to schedule an inspection.

You should expect the inspection to take place within 30 days after your application has been submitted.

Do You Need a Building Permit to Remodel a Pool in Miami Dade County?

If you are planning on making any changes to your pool, you will need to get a permit from the Miami Dade Building Department. This includes anything from changing the shape of the pool to adding new features.

The process of getting a permit can be confusing and time-consuming, but we are here to help. We have compiled all the information you need to know about getting a permit for your pool remodel.

What You Need to Know About Getting a Permit

The first step in getting a permit is to submit an application to the Miami Dade Building Department. The application must include:

• A site plan that shows the location of the pool on the property
• A detailed drawing of the proposed changes
• A description of the work that will be done
• The name and address of the contractor who will be doing the work
• The estimated cost of the project

Once you have submitted your application, you will need to schedule an inspection. The inspector will come to your property and make sure that everything is up to code. If everything is in order, you will be issued a permit.

Why is a Building Permit Necessary?

A building permit is necessary to ensure that your pool remodel is safe and up to code. By getting a permit, you are making sure that your project meets all the safety standards.

Permits also help to protect you from potential liability if something goes wrong during the remodel. If you do not have a permit, you could be held responsible for any damages or injuries that occur.

Tips for Getting Your Permit Approved There are a few things you can do to increase the chances of your permit being approved:

• Make sure you submit a complete and accurate application
• Schedule your inspection in advance
• Be prepared to answer any questions the inspector may have
• If you follow these tips, you should have no problem getting your permit approved

What Happens if You Don’t Get a Permit?

If you decide to remodel your pool without a permit, you are taking a risk. You could be fined or even ordered to demolish the work that has been done. It is not worth the risk to remodel your pool without a permit.

When Do You Need to Get a Permit?

You will need to get a permit any time you make changes to your pool. This includes adding features, changing the shape of the pool, or making any other structural changes.

If you are unsure whether or not you need a permit, we recommend contacting the Miami Dade Building Department. They will be able to advise you on whether or not you need a permit for your project.

You Should Hire the Professionals to Remodel Your Pool

While you may be tempted to remodel your pool yourself, it is always best to hire a professional. Pool remodeling can be complicated and dangerous, so it is best to leave it to the experts.

A professional pool remodeler will have the experience and knowledge necessary to get the job done right. They will also be able to pull the necessary permits for your project.

Hiring a professional is the best way to ensure that your pool remodel goes smoothly and that you stay safe throughout the process.

Contact Us Today!

If you are ready to get started on your pool remodel, we are here to help. Contact us today to schedule a consultation. We will help you through every step of the process, from getting a permit to finishing your remodeling project.

Do you want to install a swimming pool in your backyard but don’t know how to get started? In this article, we will walk you through the process of obtaining a swimming pool permit in Miami.

Every city has different requirements, so it is important to do your research before you start the application process. We will provide you with all the information you need to make the process as smooth as possible.

First Learn Why You Need a Permit

You might be wondering why you need a permit to install a swimming pool. After all, it is your property and you should be able to do what you want with it. In most cases, you will need a permit because pools can pose a danger to both children and adults if they are not installed properly.

Permits also ensure that your pool meets the minimum safety standards set by the state or city. These standards exist to protect the public from drowning or other accidents that could occur at private swimming pools.

There are two main types of permits that you will need to apply for when installing a pool:

• Building Permit: A building permit is required for any type of construction on your property, including the installation of a swimming pool.
• Zoning Permit: A zoning permit is required to make sure that your property meets the requirements for having a pool. For example, some cities have setback requirements that dictate how far away from the property line your pool must be.

If you are unsure whether or not you need a permit, you can contact your city’s planning and zoning department. They will be able to tell you what type of permits are required in your city.

Now that we’ve covered why you need a permit, let’s move on to how to obtain one.

Obtaining Your Swimming Pool Permit

The first step in obtaining your permit is to submit an application to your local building department. This application will include a set of construction plans that detail the size and location of your pool.

Once your application has been reviewed, you will be contacted to schedule an inspection. An inspector will come to your property to make sure that everything is up to code. If everything passes inspection, you will be issued a permit.

How to Make Sure Your Application Gets Accepted

Now that you know the basics of how to obtain a swimming pool permit, let’s go over a few tips to help ensure your application is accepted.

The first tip is to hire a licensed contractor. Most building departments will require you to have a licensed contractor perform the work. This is to ensure that the job is done correctly and up to code.

The second tip is to submit accurate plans. Take your time when creating the plans for your pool. Make sure all the dimensions are correct and that the location of the pool on your property is clearly marked.

The third and final tip is to be prepared for fees. There will likely be a fee associated with submitting your permit application and having it reviewed by an inspector.

Installing a swimming pool is a big project, but it can be a great addition to your home. With a little bit of planning and the help of a licensed contractor, you can obtain the permit you need to get started.

How Long Do You Have to Apply for a Swimming Pool Permit?

In most cases, you will have to apply for a swimming pool permit before work can begin. This is to ensure that the job is done correctly and up to code.

If you are unsure about how long you have to apply for a permit, you can contact your city’s planning and zoning department. They will be able to tell you what the requirements are in your region.

What Are Some Things to Know About Inspection?

An inspection is required to make sure that your pool meets the minimum safety standards set by the state or city. These standards exist to protect the public from drowning or other accidents that could occur at private swimming pools.

During an inspection, an inspector will come to your property to check the dimensions of your pool and make sure it is properly installed.

If you have any questions about inspections, you can contact your local building department. They will be able to help you schedule an inspection and answer any questions you may have.

Contact Us Today

If you need help obtaining a swimming pool permit, we can help. We have a team of experts who are familiar with the permitting process in Miami. Contact us today to get started. We’ll be happy to answer any questions you may have.

It's the middle of summer and you're ready to take a dip in your pool, but when you jump in, you notice that the water is cloudy and murky.

You may assume that this means it's time to drain and refill your pool, but before doing so, you should consider resurfacing it instead. In this blog post, we will discuss the benefits of resurfacing your pool and how often you should do it in order for it to stay in good condition.

What is Pool Resurfacing?

Pool resurfacing is the process of applying a new layer of material to the existing surface of your pool. This can be done for both aesthetic and functional purposes.

Aesthetic purposes may include changing the color or finish of your pool, while functional purposes may include repairing cracks or other damage.

Benefits of Resurfacing Your Pool

There are several benefits to resurfacing your pool instead of draining and refilling it. These benefits include:

• Saving water: When you drain and refill your pool, you use a lot of water that could be put to better use. On average, it takes 22,000 gallons of water to fill an average size swimming pool. By resurfacing your pool, you can save all that water and put it to use elsewhere.
• Saving money: In addition to saving water, resurfacing your pool can also save you money. Draining and refilling your pool costs an average of $300 while resurfacing it only costs about $150.
• Preventing further damage: If there are cracks or other damage to your pool, resurfacing it can prevent that damage from getting worse.

How Often Should You Resurface Your Pool?

The frequency with which you need to resurface your pool depends on several factors, including the type of material used for the surface, the climate you live in, and how often the pool is used.

For example, if you live in an area with a lot of sunlight, you may need to resurface your pool more often than someone who lives in a cooler climate.

Additionally, if you have a saltwater pool, you may need to resurface it more often than someone with a freshwater pool.

On average, most pools need to be resurfaced every five to seven years. However, it is always best to consult with a professional before making any decisions about resurfacing your pool.

If you're noticing that your pool is starting to look cloudy or murky, don't drain it just yet. Consider resurfacing it instead.

What Entails the Resurfacing Process?

Resurfacing your pool is a fairly simple process that can be completed in just a few days.

First, the old surface of your pool will be removed. This can be done with a power washer or chemicals, depending on the type of material used for the surface.

Once the old surface has been removed, any cracks or damage will be repaired. Next, the new surface will be applied.

This process can be done manually or with a machine, depending on the size and shape of your pool. Once the new surface has been applied, it will need to cure for 24 hours before you can use your pool again.

While resurfacing your pool may seem like a daunting task, it's actually a fairly simple process that can be completed in just a few days.

Signs Your Pool Needs to Be Resurfaced

If you're not sure whether or not your pool needs to be resurfaced, there are a few signs you can look for.

These signs include:

• Cloudy or murky water: If the water in your pool is starting to look cloudy or murky, it may be time to resurface it.
• Damage to the surface: If there are cracks or other damage to the surface of your pool, resurfacing it can prevent that damage from getting worse.
• Fading color: If the color of your pool is starting to fade, resurfacing it can help restore its original color.

If you notice any of these signs, it's a good idea to consult with a professional before making any decisions about resurfacing your pool.

You Should Hire a Professional to Do the Job

While you can technically resurface your pool yourself, it's always best to hire a professional to do the job.

Resurfacing your pool is a fairly simple process, but there are a few things that can go wrong if you're not careful.

For example, if you don't remove the old surface properly, it can cause the new surface to peel or crack. Additionally, if you don't repair any cracks or damage before applying the new surface, they will likely get worse over time.

Hiring a professional to resurface your pool is the best way to ensure that the job is done correctly and that your pool will look its best for years to come.

Contact Us Today!

If you're thinking about resurfacing your pool, we'd love to speak with you. We would be happy to answer any questions you have and give you a free estimate. Contact us today to learn more about how we can help.

If you have a swimming pool, then you know that it can be a lot of fun. But it’s also important to keep it clean and maintained. One of the most common problems that people have with their pool is getting stains on the plaster.

This can be frustrating, but don’t worry: we’re here to help! In this article, we will discuss some of the best ways to remove stains from your pool plaster.

Why Do Pool Stains Happen?

There are a few different reasons why stains can occur in your pool. One of the most common causes is simply due to dirt and debris. When these things build up on the surface of your pool, they can create stains.

Another common cause of pool stains is chemical imbalances. If the pH level of your pool water is off, it can cause problems like staining. Finally, certain types of algae can also cause staining.

If you’re dealing with any of these problems, don’t worry: there are ways to remove the stains and get your pool looking good as new!

First Identify the Stain You Want to Remove

Before you start trying to remove a stain, it’s important to first identify what type of stain it is. This will determine the best course of action for removal.

There are three main types of stains that you might find in your pool: metal stains, organic stains, and scale stains.

• Metal stains are usually caused by things like iron or copper in the water. These can be difficult to remove, but there are special chemicals that can help.
• Organic stains are usually caused by things like leaves or twigs. These can often be removed with a simple dose of chlorine.
• Scale stains are usually caused by hard water deposits. These can be removed with acids or other specialty chemicals.

Now that you know what type of stain you’re dealing with, you can start to remove it.

Removing Metal Stains

If you have a metal stain, the first thing you’ll want to do is test the pH level of your pool water. If it’s too high or too low, it will make the stain harder to remove.

Once you’ve balanced the pH level, you can add a metal sequestrant to the pool. This will help to bind the metals together so that they can be more easily removed.

Finally, you can use a brush or other tool to scrub away the stain. It might take some elbow grease, but eventually, it should come off.

Removing Organic Stains

Organic stains are usually caused by things like leaves or twigs. These can often be removed with a simple dose of chlorine.

If the stain is particularly stubborn, you may need to use a brush or other tool to scrub it away. Remember to be gentle: you don’t want to damage the plaster.

Removing Scale Stains

Scale stains are usually caused by hard water deposits. These can be removed with acids or other specialty chemicals.

You’ll need to be careful when using these chemicals, as they can damage the plaster if used improperly. Be sure to follow the directions on the label carefully.

Once you’ve applied the chemicals, you can use a brush or other tool to scrub away the stain. Again, it might take some elbow grease, but eventually, it should come off.

Only Use an Acid Bath in Extreme Cases

In some cases, you might need to use an acid bath to remove a stain. This should only be done in extreme cases, as it can be very dangerous.

If you decide to use an acid bath, be sure to wear gloves and other protective gear. You’ll also want to make sure that the area is well ventilated.

Once you’ve taken all of these precautions, you can apply the acid to the stained area. Let it sit for a few minutes before rinsing it away with clean water.

How to Prevent Pool Stains

Now that you know how to remove stains, you might be wondering how you can prevent them from happening in the first place.

One of the best ways to prevent pool stains is to keep your pH level balanced. You should test the pH level of your pool water at least once a week.

It’s also important to clean your pool regularly. Be sure to brush the sides and bottom of the pool, as well as vacuum it on a regular basis.

Finally, you should use a pool cover when it’s not in use. This will help to keep dirt and debris out of the water. By following these simple tips, you can keep your pool looking great all season long.

Contact Us Today!

If you’re having trouble removing a stain from your pool, we’d love to hear from you. We’ll be happy to help you get it clean and keep it looking its best. Contact us today to learn more about how we can help.

Summertime is the perfect time to take a dip in your pool to cool off from the heat. But, did you know that pools require maintenance year-round? In this article, we will discuss the basics of how to maintain your own pool.

This includes cleaning, chemical balancing, and repairing any damages. By following these simple steps, you can ensure that your pool is always ready for a swim.

Check the Water Quality

The first step to maintaining your pool is to check the water quality. You will need to test the pH levels, chlorine levels, and alkalinity. This can be done with a water testing kit that you can purchase at your local hardware store.

If the levels are not where they should be, you will need to add chemicals to balance them out.Be sure to follow the directions on the chemical bottles carefully.

Clean the Pool Filter Regularly

In order to keep your pool water clean, you will need to clean the filter regularly. Depending on the type of filter you have, this may need to be done once a week or once a month. You can clean the filter yourself or hire a professional to do it for you.

Inspect the Pool for Damages

It is also important to inspect your pool for any damages that may have occurred. This includes cracks in the plaster, tears in the liner, and loose tiles.

If you find any damage, it is important to repair it as soon as possible. Otherwise, it could lead to further damage or even cause someone to get hurt while swimming.

Check the Water Level

It’s important to always check the water level in your pool. This is especially important if you live in an area that gets a lot of rainfall.

If the water level is too low, you can use a garden hose to add more water. Be sure to turn off the pump before doing this.

Skim and Scrub Your Pool

You will also need to skim and scrub your pool on a regular basis. This helps to remove any dirt, debris, or leaves that may have fallen into the water.

You can use a net to remove large items from the surface of the water. For smaller items, you can vacuum them up. Be sure to also brush the walls and floor of your pool on a weekly basis.

Add Chlorine as Needed

Chlorine is an important chemical when it comes to keeping your pool clean. Be sure to add chlorine as needed in order to keep the water safe for swimming.

You can purchase chlorine tablets at your local hardware store. Simply drop them into the skimmer basket and they will dissolve over time, releasing chlorine into the water.

Winterize Your Pool After the Summertime

After the summertime, you will need to winterize your pool. This includes removing all of the water from the pool and storing it in a safe place.

You should also cover the pool with a tarp or winter cover. This will help to protect it from the elements and prevent any damage from occurring.

Use Baking Soda to Regulate Your Pool’s pH Levels

One of the best ways to regulate your pool’s pH levels is to use baking soda. Baking soda is a natural substance that can be used to raise or lower the pH levels in your pool.

To use baking soda, simply add it to your skimmer basket and let it dissolve into the water. You can also purchase pre-measured bags of baking soda from your local hardware store.

Use a Tennis Ball to Absorb Excess Oils

If you find that there is an excess of oils in your pool, you can use a tennis ball to absorb them. Simply place the tennis ball in the water and let it float around for a while.

The tennis ball will absorb the oils from the water, leaving it clean and fresh. You can also purchase special oil-absorbing pads from your local hardware store.

Power Wash Your Pool Deck

If your pool deck is made of concrete, you should power wash it on a yearly basis. This will help to remove any dirt, grime, or stains that may have built up over time.
To power wash your pool deck, simply rent a power washer from your local hardware store. Be sure to follow the instructions carefully and always wear protective clothing when using the power washer.

Hire a Professional Pool Service

If you don’t have the time or knowledge to maintain your own pool, you can always hire a professional pool service. Pool services typically offer weekly or monthly maintenance packages.

These packages usually include all of the necessary services to keep your pool clean and safe for swimming.

Contact Us Today!

If you’re interested in learning more about how to maintain your own pool, contact us today. We would be happy to answer any of your questions or provide you with a free estimate.

We provide our customers with professional quality work at a fair price. We GUARANTEE to be on time.

We provide our customers with professional quality work at a fair price. We GUARANTEE to be on time.